Buying a brand new property for domestic or commercial purposes can be thrilling and frightening at the same time. There are many things to take care of when searching for a residence, negotiating, bidding and making the necessary arrangements to buy the property. Amongst the most important things prior to buying a house, is to have a house inspection done. This is very essential as you cannot afford to neglect the process in order to ensure that you are not getting a home with any structural and other problems. Building inspection are encompassing examinations done to know the condition of a home. This inspection is done at the time of home sale or home renovation. This is an inexpensive way to know the condition of the building or avoid buying a building in case of any major repairs. A building inspector report is different to a ‘pest inspection report’. While a building inspection report should identify any visual damage that may have been caused by termites, it usually won’t include the existence of termites or other timber destroying pests.
What Is A Building Inspection And Why Is It Necessary?
A building inspection is an assessment or evaluation of a building or other framework and is accomplished by a professional structural examiner. The inspection consists of checking the floorings, ceilings, roofing spaces, doors, plumbing, electrical wiring and much more. Building inspection needs to be carried before the auction. A pre-purchase building inspection will help you finalize the purchase of a property. Even if you are buying a brand new building, you need a building inspection. Building inspections will inspect the attic, roof, plumbing system, electrical components and home appliances to ensure that the workmanship on the new building is up to scratch. As there are many areas to be inspected the buyer cannot perform them all by themselves and so an expert is required to do the job.
Who benefits from a property inspection? Buyer or Seller?
Whether you are buying or selling a property, property inspection is very important for a smooth transaction. Not being prepared to the last minute can cause issues with sale or purchase and cause many problems to the seller and the buyer. For a buyer, a house inspection report is important as it ensures that the property is in good condition and has no major issues which will affect the value or cost of the property to rectify in the future. For sellers, building inspection is necessary as it demonstrates transparency and honesty on the seller’s behalf and it means that the buyer does not have to order and pay for it separately which is a good gesture that may give the seller a psychological edge.
Issues that turn up with building inspection reports
Whether you are considering the purchase of a new home or planning to list your property for sale, you must get a building inspection by a professional. This way you will be able to address common problems discovered during building inspection. The following are some common problems that turn up with building inspection.
1. Drainage- This is one of the primary issue which is disclosed in an inspection report. The crucial aspects of the property are determined for water damage, cracked slabs, drainage deficiencies etc. In most of the cases, repair or installation of new gutters, down pipes can reduce the threat of water damage significantly.
2. Poor Ventilation- Poor ventilation can be caused due to homes that are aggressively sealed against energy loss. The result is there is a high level of moisture within the home and this can lead to mold growth, water damage and rot too.
3. Plumbing problems- Plumbing in any home is intricate, but it can also be source of problems on a professional building inspection report. Waste lines, faulty fixtures, outdated piping can all become an issue. Plumbing defects are the common issues that are discovered by building inspectors and it can affect the sale of property if they are not attended to.
4. Roofing- well built roofs have long life expectancy, but sometimes even the best roofs can begin to degrade. Building inspection can turn up roofing issues which might have gone undetected previously until it is severe enough to cause leaks which will be visible immediately.
5. Structural damages- structural damages can happen with general wear and tear of the underlying presence of the above mentioned issues. Undetected leaks, poor maintenance, plumbing issues are all factors that contribute to structural damage.
Latest Technology In Building Inspection
Building inspection has evolved drastically over the last decade with new technologies evolving. Many new technologies have come on the market; companies are equipping their inspectors with good equipment which provides thorough assessment at low cost. One such technology is thermal imaging done with Infrared image camera. Thermal imaging done with infra red cameras is an emerging technology. It is a non-intrusive, non-invasive and non-destructive method and large areas of the building can be scanned fast and efficiently and identifies the target hot spots accurately. This camera works by detecting the temperature difference and can help in diagnosing problems in areas such as electrical systems, moisture detection in the building, roof and basement leaks, HVAC system malfunctioning etc. Consultants and building inspectors are now utilizing this tool extensively to provide a good building inspection report. The infrared inspection can help in preventative and corrective maintenance efforts. Thermal imaging done with infra red cameras can pick up problems behind the walls such leaky pipes, pest infestations and hidden structural damage. These things are very hard to detect otherwise. It provides a report on the problem areas of the building and improvements can be done accordingly. It will provide the homeowner or seller an idea on how much money has to be spent on repairs and what resources are required.
Article Source: http://EzineArticles.com/expert/Raghav_Saxena/1724276
Article Source: http://EzineArticles.com/8680035