Advertisement

Allianz Travel Insurance

The 5 Deadly Truths Of Pipe Relining

Introduction

In recent years, pipe relining Sydney has become a popular choice for homeowners and business owners who want to fix their plumbing problems without digging up the ground. While this approach is often less disruptive than traditional trenching, it still comes with some risks that you should be aware of before you make a decision about how to fix your pipes. Here are five deadly truths about pipe relining:

Damage

When you’re looking to replace a pipe, it can be tempting to just dig up the damaged one, cut it out and replace it with a new one. However, this process will likely cause damage to your surrounding area as well as create more work for yourself in the long run.

Instead of causing damage and making more work for yourself later on down the line, try pipe relining. This process involves removing old pipes, cleaning out the area around them, installing new pipes and connecting them up to existing pipes with no need for digging out dirt or cutting into walls or floors. The end result is an entirely new pipe system that looks just like before!

Trenching

Trenching is a necessary part of relining, but it’s also time consuming and expensive. Here are some tips to help you make the best of trenching:

  • Ensure that your soil is soft enough to dig through easily. If not, consider hiring a professional excavator instead of doing it yourself.
  • Make sure all the pipes are in place before you start digging. This will save you from having to dig twice!
  • Protect the environment by using protective barriers around trees and other sensitive areas on your property as well as preventing any potential injuries due to falling debris or rocks (which can cause damage if not handled properly).

Extraction

Removing the old pipe is a crucial part of relining. The process of extraction can be done manually or mechanically.

Mechanical extraction involves using cutting tools such as a saw, where the cut is made by rotating blades against the pipe wall. A hydraulic cutter can also be used to cut out sections of piping quickly and efficiently, as it uses compressed air to generate pressure which pushes against metal pipes and makes them easier to break apart.

If you have complicated pipe networks that need digging around, then high pressure water jetting may be your best option for extracting existing pipes from underground before relining them with new ones.

Blockage

Blockages are one of the most common problems that plumbers encounter in their work. The symptoms of a blocked pipe include discoloration, reduced flow, and buildup above the sink. A number of factors contribute to a blockage, including food particles and hair, which can build up over time and cause your pipes to become clogged.

Other causes include grease or oil stains on surfaces such as sinks or bathtubs; these substances can seep into the cracks in your pipeline after washing them down with water (this is especially true for older pipes). If you notice any signs that indicate there may be an issue with your plumbing system—for instance, if your sink has been clogging more often than usual—you may want to consider having it inspected by a professional before more serious damage occurs!

Property Damage

We’ll start with the most obvious one: property damage.

As you can imagine, when you’re excavating or placing pipe inside your home, there’s a chance that some damage will occur to either the structure itself or its contents. Trenching and extraction can also cause damage by cutting into various pipes and wires that may not be readily visible from the surface.

Blockages are another common cause of property damage; after all, what good is relining if it doesn’t seal up your existing pipes? Using a low-quality lining material could result in future blockages down the road—and those can lead to all sorts of problems, including flooding and sewer backups.

Finally, there’s also a risk of property damage when relining itself goes wrong—for example, if unskilled workers mishandle their equipment during installation or don’t have adequate training in general construction techniques like trenching/extraction or blockage removal

You can fix pipes with minimal damage to the surrounding area.

Pipe relining is a trenchless (non-digging) technology that can be used to fix leaking pipes. It’s a great alternative to digging up the pipes, which can cause damage and inconvenience for homeowners.

The most common way of digging up pipes is called pipe bursting, where an excavator cuts a section out of your lawn or driveway and replaces it with new PVC or PEX piping. Your water supply will be shut off while this process takes place and then again when they reconnect your plumbing once everything has been replaced.

This method may also require you to replace other parts like toilets or faucets if there are any leaks in their connections as well. The replacement process takes time and requires more work than just fixing leaks from the inside!

Conclusion

Pipe relining is a great way to fix your pipes without having to dig up the entire area. It’s quick, easy and affordable. You can get started on your project today by calling us at (888) 543-6611 or visiting our website at www.pipelinerelining.com .